electrolytic aluminum anode assembly rod

Sep 29, 2021

electrolytic aluminum anode assembly rod is used to connect anode bus and anode steel claw in aluminum electrolysis process. It plays an important role in conducting electricity and hanging anode carbon block.For a long time, the anode guide rod used in the domestic aluminum industry was made by adding less than 0.5% magnesium in 99.7% aluminum liquid.

Due to its low strength and hardness, it is easy to bend and scratch the surface.""The most important is to cause the poor contact between the guide rod and the anode bus, the high pressure drop of the clamp, the frequent maintenance of the guide rod, and the increase of enterprise cost.
The production equipment of electrolytic aluminum industry must be developed in the direction of energy saving and environmental protection."Adding iron, magnesium and other elements can effectively improve the conductivity, tensile strength and hardness of the electrolytic aluminum anode assembly rod .
Through the test, the hardness and strength of the new type of electrolytic aluminum anode assembly rod have been greatly improved. The measurement also found that the pressure drop of the guide bar itself increased by 1.4mv, while the contact pressure drop of the guide bar and bus bar decreased by 5.3mv, and the comprehensive pressure drop decreased by 3.9mv