1145 battery aluminum foil
1145 battery aluminum foil quality requirements
1.The surface of the aluminum foil is uniform in color, clean, and flat, without obvious roll marks, pitting, pinholes, and corrosion marks;
2. 1145 battery aluminum foil surface has no rolling defects such as creases, mottling, bright lines, etc.;
3, There is no color difference on the surface of the aluminum foil;
4, There is no oil on the surface, no serious oil odor, and no visible oil spots;
5, Surface tension, the dyne pen test is not less than 32 dyne;
1145 battery aluminum foil appearance requirements
1, The aluminum https://www.aluminium-foil.netfoil coil is wound with moderate tightness, the end surface is flat and clean, and the edge is smooth;
2, the staggered layer of aluminum foil should not exceed ±1.0mm;
3, the width of the aluminum foil roll tube core is greater than or equal to the foil width, and generally the length of the two ends of the tube core does not exceed the foil width 5mm;
4, the aluminum foil should be wrapped around the center of the die;
5, the joint part has clear joint marks on the two ends of the aluminum coil.
Aluminium Sheets
View DetailsAluminium Coils
View DetailsAluminium Foils
View DetailsAluminium Strips
View DetailsAluminium Circles
View DetailsCoated Aluminium
View DetailsMirror Aluminum
View DetailsStucco Embossed Aluminum
View DetailsAluminum
- Corrosion-resistant national s...
- PCB Aluminum Drilling Entry Sh...
- The falw of Powder Spraying an...
- Aluminum blanks for sublimatio...
- The common advantages of anodi...
- Aluminum foil manufacturer in...
- 5005 Aluminum plate
- Which aluminum wafer manufactu...
- Stone and marble finish Coated...
- Aluminum-magnesium alloy alumi...
- 3003 Aluminum Sheet
- Advantages of aluminum alloy a...
- Aluminum bar,Aluminum Square B...
- 3003 insulation aluminum coil...
- self bonding aluminum magnet w...
- Aluminium circle /aluminum dis...
- 7075 aluminum square bar
- 1100 H22 Conduit Aluminum Foil
- 4343/3003/7072 Aluminum Claddi...
- Explosion welding metal plates