5052 Anodised aluminum coil belongs to Al-Mg alloy, cold forming has good processing performance and processing performance, good corrosion resistance, rust proof aluminum alloy 5052 is one of most widely used alloys, this alloy has high strength, especially the anti fatigue strength, ductility and high corrosion resistance, in the semi cold hard plastic is good.After doing the anodised oxidation treatment to improve coating adhesion and corrosion resistance, have the good surface quality, stable performance,etc.
The advantages of 5052 Anodised aluminum coil
• Top-grade quality. Refined, luxurious and sparky surface
• Unique finish
• Low proportion, only 1/3 of stainless steel weight and easy for further fabrication
• Sapphire grade surface hardness for scratching resistance
• Environmental friendly material
• Anti-interference, shield electromagnetic wave
• High thermal conductivity, which perfectly for electronic device
• High finger print resistance and do not attract dust
• The oxidizing layer will not crach, peel off or flake
• Multiple colours can provide unlimited possibilities for device design
• Simplified flow, high yield productivity, cost saving
Chemical Properties -5052 Anodised aluminum coil
| Alloy Designation | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V | Remarks | Others |
Aluminium min |
||
| Numerical | Chemical Sympols | Each | Total | |||||||||||||
|
EN AW -5052 |
EN AW- Al-Mg2.5 |
0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.15-0.35 | - | 0.10 | - | - | - | - | 0.05 | 0.15 | Remainder |
| Specification-5052 Anodised aluminum coil | |||||||
| Alloy | Temper |
Thickness (mm) |
Thickness Tolerance |
Width (mm) |
Width Tolerance |
Length (mm) |
Length Tolerance |
| 5052 |
O,F H14, H16,H18H32,H34 H36,H38 etc. |
≤3 | Thickness tolerance is according to EN485-4 Standard | ≤1520 |
Width Tolerance is according to EN485-4 Standard |
800-- 2600 |
Length tolerance is according to EN485-4 Standard |
| Anodized aluminum film: | ≤20um, or as customer’s request | ||||||
| Surface: | Brilliant Finish, Matt Finish,Lumenal Matt, Semi Specular, Erotex, Stucco Finish, etc. | ||||||
| Colors: | Nature,Champagne,Gold,Grey,Bronze,Dark Bronze,Black,etc | ||||||
| Application | Curtain wall,Architecture,Consumer Electron,Home Appliances,etc. | ||||||
| Mechanical properties are in complicance with EN485-2 standard | |||||||
