Why is the anode steel claw red ? and how to solve ?
After adding insulation material;Under the anode, there are crusting blocks or carbon blocks, etc.
Treatment method:
If the electrolyte level is too high, then it is necessary to lift the anode to check whether the anode is rinsed or melted.If the current is biased, the anode current distribution should be improved by the method of adjusting the electrode.If the anode is sliding, the anode needs to be lifted into place with a crown; If the insulation material is too thick, manually use a rake to scrape out the aluminum oxide powder on the pole to increase heat dissipation; If there is something under the anode, it is necessary to lift the electrode to hook out the carbon block or crust block under the bottom of the anode.
Aluminium Sheets
View DetailsAluminium Coils
View DetailsAluminium Foils
View DetailsAluminium Strips
View DetailsAluminium Circles
View DetailsCoated Aluminium
View DetailsMirror Aluminum
View DetailsStucco Embossed Aluminum
View DetailsSteel
- Explosion welding aluminum ste...
- Copper clad steel plate for co...
- stainless steel copper aluminu...
- Three-layer copper stainless s...
- Aluminium clad steel bimetalli...
- Aluminum rod for Steel Plant D...
- Aluminium Stainless steel tran...
- copper clad steel sheet and st...
- Process of Prebaked Anode Stee...
- stainless steel aluminum tri p...
- Pre-baked anode steel claw pro...
- Anode steel claws
- Aluminum steel transition bloc...
- Self Lubricating copper steel...
- Electrolytic steel claw
- Explosion Bonded Copper Clad S...
- cast steel anode yoke
- aluminum stainless steel conne...
- Copper steel explosive bonded...
- echnical Requirements For Clad...