Vehicle Wheel Aluminium Block

Dec 26, 2022

Aluminium block for vehicle wheel
Alloy 2024 ,5052,5083,5454

aluminium specilizes in procesing Aluminium block for vehicle wheel , we have the slitter line, slab cutting line, shear line. The equipments include sheet shear machine, plate sawing and cutting machine, tube and bar sawing machine and so on. We can slit, cut across, longitudinal cutting, sawing, shearing and coated with plastic. We can offer the exactest Aluminium block for vehicle wheel which is the most economical and reasonable.



Aluminium block for vehicle wheel, offered by us, are manufactured using high quality Aluminum,are made available in different dimensions as per the requirement of the clients. Owing to their good formability, heat resistance,high strength, especially the anti fatigue strength, ductility and high corrosion resistance.etc,the Aluminium block can be used for different vehicle wheel.

General Specification

Alloy	Temper	Specification (mm)
		Thickness	Width	Length
.2024 ,5052,5083,5454	H111, H112, H116,T4, T6, T651	6~300mm	100~2600	500~16000
Remark: special specifications can be produced accordingly to your requirement.

Main Aluminum Alloy Chemical Composition

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni		Zn		Ti	Others		Alu min
												each	Total
2024	0.50	0.50	3.8~4.9	0.3~0.9	1.2~1.8	0.1	-		0.25		0.15	0.05	0.15	remainder
5052	0.25	0.40	0.10	0.10	2.2~2.8	0.15~0.35	-		0.1		-	0.05	0.15	remainder
5083	0.40	0.40	0.10	0.4~1.0	4.0~4.9	0.05~0.25	-		0.25		0.15	0.05	0.15	remainder
5454	0.25	0.40	0.10	0.50-1.0	2.4-3.0	0.05-0.20		-		0.25	0.20	0.05	0.15	remainder

Main Aluminum Alloy Physical property

Alloy	Temper	Specified Thickness mm		Tensile strength Rm MPa		Yield strength Rp 0.2 MPa		Elongation min.		Bend Radius		Hardness
		over	Up to	Min.	Max.	Min.	Max.	A50mm	A	180°	90°	HBW
5052	O/H111	6	12.5	165	215	65	-	19	-	-	2.0t	46
		12.5	80.0	165	215	65	-	-	18	-	-	46
	H112	6	12.5	190	-	80	-	7	-	-	-	55
		12.5	40.0	170	-	70	-	-	10	-	-	47
		40.0	80.0	170	-	70	-	-	14	-	-	47
5083	0/H111	6.3	12.5	270	345	115	-	16	-	-	-	75
		12.5	50.0	270	345	115	-	-	15	-	-	75
		50.0	80.0	270	345	115	-	-	14	-	-	73
		80.0	120.0	260	-	110	-	-	12	-	-	70
		120.0	200.0	255	-	105	-	-	12	-	-	69
		200.0	250.0	250	-	95	-	-	10	-	-	69
		250.0	300.0	245	-	90	-	-	9	-	-	69
	H112	6.0	12.5	275	-	125	-	12	-	-	-	75
		12.5	40.0	275	-	125	-	-	10	-	-	75
		40.0	80.0	270	-	115	-	-	10	-	-	73
		80.0	120.0	260	-	110	-	-	10	-	-	73
	H116	6.0	12.5	305	-	215	-	12	-	-	4.0t	89
		12.5	40.0	305	-	215	-	-	10	-	-	89
		40.0	80.0	285	-	200	-	-	10	-	-	83
5454	0/H111	6,0	12.5	215	275	85	-	18		-	2.5t	58
		12,5	80,0	215	275	85	-	-	16	-		58
	H112	≥ 6,0	12,5	220	-	125	-	8				63
		12,5	40,0	215	-	90	-		9			59
		40,0	120,0	215	-	90	-		13			59
2024	O	6.0	9.0	-	220	-	140	13	-	-	2.5t	55
		9.0	12.5	-	220	-	140	13	-	-	4.0t	55
		12.5	25.0	-	220	-	-	-	11	-	-	55
	T3/T351	6.0	12.5	440	-	290	-	13	-	-	-	124
		12.5	40.0	430	-	290	-	-	11	-	-	122
		40.0	80.0	420	-	290	-	-	8	-	-	120
		80.0	100.0	400	-	285	-	-	7	-	-	115
		100.0	120.0	380	-	270	-	-	5	-	-	110
		120.0	150.0	360	-	250	-	-	5	-	-	104

Applications：
The Aluminium block can be used for different vehicle wheel.

---