| Working Range | ||
| Element | Min(%) | Max.(%) |
| C | 0.08 | 0.15 |
| Si | 0.35 | 0.60 |
| S | 0.03 | |
| P | 0.05 | |
| Mn | 0.25 | 0.50 |
| Cr | 0.25 | |
| Ni | 0.4 | |
| Mo | 0.15 | |
| Cu | 0.30 | |
| Carbon Equivalent | ||
Melt Range: 1494-1515℃
Electrolytic aluminum steel anode claws is also called electrolysis claw. There are several types of steel anode claws, such as parallel three steel anode claws, four steel anode claws, stereoscopic four steel anode claws, six steel anode claws, eight steel anode claws, double steel anode claws etc.
Equipped with physical and chemical measurement and quick analysis lab before ladle, refining by electric arc furnace (or intermediate frequency furnace) and adding the rare earth, all these ensure the lowest air and impurities content in the molten steel, which achieves good conductivity. By advanced dry sand compaction negative pressure (LOST FOAM) environmental casting process, the steel anode claws gets the qualified dimensions, smooth surfaces, good internal organization, free of sand holes, slag inclusion, cracks, porosity and shrinkage defect.
