Specifications of deep drawing aluminum disc circle:
|
1. Available aluminium alloy:1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. 5000 series e.g. 5005, 5052, 5083, 5182 etc. Both hot treated and non-heat treated alloy can be used for aluminum circle production. Hope you can let us know the specific requirement of your product through inquiry. |
|
2. Thickness range: 0.2mm ~ 6mm Width range: 50mm ~ 1200mm |
|
3. Temper: O, H12, H22, H14, H24, H16, H26, etc. |
|
4. Hot rolled and cold rolled both available |
|
5. Surface: Bright silver, mill finished |
Chemical Composition (%) for Aluminum Circle
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Al |
|
1060 |
0.25 |
0.4 |
0.05 |
0.05 |
0.05 |
|
|
0.05 |
0.03 |
99.6 |
|
1050 |
0.25 |
0.4 |
0.05 |
0.05 |
0.05 |
|
|
0.05 |
0.03 |
99.5 |
|
1100 |
0.95 |
0.05-0.2 |
0.05 |
|
|
|
0.1 |
|
||
|
1200 |
1.0 |
0.05 |
0.05 |
|
|
|
0.1 |
0.05 |
||
|
3003 |
0.6 |
0.7 |
0.05-0.2 |
1.0-1.5 |
|
|
|
0.1 |
|
remainder |
Product process
1. Ingot/Master Alloys --- Melting Furnace – Holding Furnace --- D.C. Caster --- Slab ---- Scalper --- Hot Rolling Mill – Cold Rolling Mill – Punching – Annealing Furnace -- Final Inspection – Packing --- Delivery
