Aluminium Block Parts


Aluminium block for different parts

aluminium specilizes in procesing Aluminium block for different parts , we have the slitter line, slab cutting line, shear line. The equipments include sheet shear machine, plate sawing and cutting machine, tube and bar sawing machine and so on. We can slit, cut across, longitudinal cutting, sawing, shearing and coated with plastic. We can offer the exactest Aluminium block for different parts which is the most economical and reasonable.



Aluminium block for different parts , offered by us, are manufactured using high quality Aluminum,are made available in different dimensions as per the requirement of the clients. Owing to their good formability, high corrosion resistance, good weldability,good physical properties, processability ,and with high strength, high hardness ,low sensitivity to crack,etc,the Aluminium block can be used for different parts.

General Specification

Alloy Temper Specification (mm)
Thickness Width Length
3003,5052 5182,
6061,6063,6082

H111, H112, H116,T4, T6, T651 6~300mm 100~2600 500~16000
Remark: special specifications can be produced accordingly to your requirement.

Main Aluminum Alloy Chemical Composition

Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Others Alu min
each Total
3003 0.6 0.7 0.05-0.20 1.0-1.5 - - - 0.10 - 0.05 0.15 remainder
5052 0.25 0.40 0.10 0.10 2.2~2.8 0.15~0.35 - 0.1 - 0.05 0.15 remainder
5182 0.20 0.35 0.15 0.20-0.50 4.0-5.0 0.10 - 0.25 0.10 0.05 0.15 remainder
6061 0.4~0.8 0.7 0.15~0.40 0.15 0.8~1.2 0.04~0.35 - 0.25 0.15 0.05 0.15 remainder
6082 0.7-1.3 0.50 0.10 0.40-1.0 0.6-1.2 0.25 - 0.20 0.10 0.05 0.15 remainder
6063 0.20-0.6 0.35 0.10 0.10 0.45-0.9 0.10 - 0.10 0.10 0.05 0.15 remainder

Main Aluminum Alloy Physical property

Alloy Temper Specified
Thickness
mm
Tensile
strength
Rm MPa
Yield strength
Rp 0.2 MPa
Elongation
min.
Bend
Radius
Hardness
over Up to Min. Max. Min. Max. A50mm A 180° 90° HBW
3003 O/H111 6.0 12.5 95 135 35 24 1.5t 28
12.5 50.0 95 135 35 23 28
H112 ≥ 6,0 12,5 115 - 70 10 35
12,5 80,0 100 - 40 18 29
5052 O/H111 6 12.5 165 215 65 - 19 - - 2.0t 46
12.5 80.0 165 215 65 - - 18 - - 46
H112 6 12.5 190 - 80 - 7 - - - 55
12.5 40.0 170 - 70 - - 10 - - 47
40.0 80.0 170 - 70 - - 14 - - 47
5182 0/H111 0,5 1.5 255 315 110 - 12 - 1.0t - 69
1.5 3.0 255 315 110 - 13 - 1.0t - 69
6061 O 6,0 12,5 150 85 16 2,0 t 40
12,5 25,0 150 16 40
T4/T451 6,0 12,5 205 110 18 4,0 tb 58
12,5 40,0 205 110 15 58
40,0 80,0 205 110 14 58
T42 6,0 12,5 205 95 18 4,0 tb 57
12,5 40,0 205 95 15 57
40,0 80,0 205 95 14 57
T6
T651
T62
6,0 12,5 290 240 9 5,0 tb 88
12,5 40,0 290 240 8 88
40,0 80,0 290 240 6 88
80,0 100,0 290 240 5 88
100,0 150,0 275 240 5 84
150,0 250,0 265 230 4 81
250,0 350,0 260 220 4 80
6082 O 6,0 12,5 150 85 17 2,5 t 40
12,5 25,0 155 16 40
T4/T451 6,0 12,5 205 110 14 4,0 t b 58
12,5 40,0 205 110 13 58
40,0 80,0 205 110 12 58
T42 6,0 12,5 205 95 14 4,0 t b 57
12,5 40,0 205 95 13 57
40,0 80,0 205 95 12 57
T6
T651
T62
6,0 12,5 300 255 9 6,0 t b 91
12,5 60,0 295 240 8 89
60,0 100,0 295 240 7 89
100,0 150,0 275 240 6 84
150,0 175,0 275 230 4 83
175,0 350,0 260 220 2



Applications:
The Aluminium block can be used for different parts.




Aluminium Sheets
Aluminium Sheets

View Details
Aluminium Coils
Aluminium Coils

View Details
Aluminium Foils
Aluminium Foils

View Details
Aluminium Strips
Aluminium Strips

View Details
Aluminium Circles
Aluminium Circles

View Details
Coated Aluminium
Coated Aluminium

View Details
Mirror Aluminum
Mirror Aluminum

View Details
Stucco Embossed Aluminum
Stucco Embossed Aluminum

View Details