5052Aluminum Circle
| Product | 5052 Aluminum Circle |
| Alloy | 5052 Aluminum Circle |
| Temper | O, H32, H34, H111 |
| Thickness | 0.5mm-6.0mm |
| Diameter | 100mm-1200mm |
| Lead Time | Within 30-45 days after receiving deposit |
| Packing | Standard Exporting wooden pallets or based on customer requirement |
| Material | Using high-tech machinery utilizing premium grade Aluminium Coil. Customized according to the needs and demands of the clients these can be availed at different technical specifications. |
| Surface: | Bright & smooth surface, free from defects like white rust, oil patch, edge damage. |
| Application | Aluminium Circles are used in Reflective Sign Boards, Road Furniture, Utensils, Sand witch Bottom, Cooker, Non-Stick etc. |
5052 Aluminum circle advantages
1.Good quality of deep drawing aluminium circle , and can maintain semi-specular finish with a 65% minium total reflectivity after bright dip and anodize.
2. speciality is in deep drawing quality . Grain size is tightly controlled to minimize the "orange peel effect " , The "orange peel effect" is a rough surface,like the surface of an orange peelwhich often occurs after deep drawing. tightly controls the chemistry and heat treating to maximize the elongation that allow the materials to stretch more.
3. is a major aluminium circle producer of bottom plates , has been producing impact bonded bottom plates in high volumnes for more than 10 years.
5052 Aluminium circle production line
1.Prepare the master alloys
2.Melting furnace :put the alloys into the melting furnance
3.D.C.cast aluminum ingot:To made the mother ingot
4.Mill the aluminum ingot:to make the surface and side smooth
5.Heating furnnace
6.Hot rolling mill:made the mother coil
7.Colding rolling mill:the mother coil was rolled as the thickness you want to buy
8.Punching process:become the size what you want
9.Annealing furnace:change the temper
10.Final inspection
11.Packing:wooden case or wooden pallet
12.Delivery
5052 Aluminium circle package
1.Put the driers side the aluminium circle , keep the products dry and clean.
2.Use the clean plastic paper , packing the aluminium circle , keep good sealing.
3.Use the snakeskin paper , packing the surface of the plastic paper , keep good sealing.
4.Next , There are two ways of packaging : One way is wooden pallet packaging , using the crusty paper packing the surface ;
Another way is wooden case packaging , using the wooden case packing the surface.
5.Final , lay the steel belt on the wooden box 's surface , keep the wooden box fastness and secure.
Chemical Properties
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min.A1 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.6 |
| 1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | - | - | - | 0.1 | - | - | - | 0.05 | 99 | |
| 1200 | 1.00 | 0.05 | 0.05 | - | - | - | 0.1 | - | - | 0.05 | 0.05 | 99 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.15 | Remainder |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | - | 0.25 | - | - | - | 0.15 | Remainder |
| Section | Alloy | Characteristics | Application | |
| 1000 series | AA1050 |
Excellent in forming, welding and corrosion resistance though lacking the strength |
Kitchen Appliances, Reflector Panel, Traffic Sing, Decorative Products, Conductive Material, Construction Material, Electrical Appliances, etc |
|
| AA1060 | ||||
| AA1070 | ||||
| AA1100 | ||||
| AA1200 | ||||
| 3000 series |
AA3003 AA3004 |
Have slightly higher strength than AA1100 and excellent in forming, welding and corrosion resistance |
Kitchen Utensils, Interior & Exeterior Materials for Construuction, etc |
|
Aluminium circle properties
1.Alloy 1050 1060 1100 1200 3003 3004 3105 5052 5005 5754 aluminium circles, deep drawing quality, good spinning quality, excellent forming and anodizing, no four ears.
2.Excellent reflectivity, good for Polishing.
3.Good anodized quality, suitable for hard anodizing and enameling.
4.Clean surface and smooth edge, hot rolled quality, fine grains and after deep drawing no looper lines.
5.Excellent pearl color anodizing.
