5005 aluminium plate description
- Alloy:5005
- Temper:H112 H111
- Mother coil:DC
- Thickness:6.0-350mm
- Width:800-1700mm
- Length:800-10000mm
- Protection:paper inter layer,white film,blue film,black-white film,micro bound film,
- according yo your requirement.
- Surface:clean and smooth,no bright speck,corrosion,oil,slotted,etc.
- Weigth:about 2mt per pallet
- Package:export standard package,wooden pallet with fumigation
- Delivery time:about 30days after receiving the deposit
- Payment:TT
- Trading terms:FOB,CIF,CFR
- Product standard:GBT,JIS ,EN,ASTM
- We can supply the Form E, Form A,CO and so on
- Total weight: +/-10%
- Thickness:+/-1% for sheet(1-6mm),+/-2%for plate(6.1-150mm)
- Width:+2/-0mm for sheet,+4/-0mm for plate
- Length:+3/-0mm for sheet,+4mm/-0mm for plate
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al | |
| standard value | 0.3 | 0.3 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | 0.25 | - | rem. |
| inner value | 0.2 | 0.5-0.65 | 0.1 | 0.1 | 0.6-0.7 | - | 0.05 | 0.015-0.02 | rem. |
5005 aluminium plate properties
- medium tenacity
- good corrosion resistance
- lower density
- high tensile strength
- high elongation
5005 aluminum plate is widely used in making conductor, cookware, dash board, flooring, shell, building trim, construction materials, voiture materials, construction material and building material which Including:roof panel, ceiling, in wall, partition wall, shutters, window blind, gate, balcony, wall road marking, street signs, road protecting plate, highway protecting plate, bridge of barrier wall, scaffold, ship plate.
Another alloy aluminium plate
Chemical Properties
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min.A1 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.6 |
| 1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | - | - | - | 0.1 | - | - | - | 0.05 | 99 | |
| 1200 | 1.00 | 0.05 | 0.05 | - | - | - | 0.1 | - | - | 0.05 | 0.05 | 99 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.15 | Remainder |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | - | 0.25 | - | - | - | 0.15 | Remainder |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | - | 0.4 | - | - | 0.1 | 0.15 | Remainder |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.1 | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
| 3A21 | 0.6 | 0.7 | 0.2 | 1.0-1.6 | 0.05 | - | - | 0.1 | - | - | 0.15 | 0.15 | Remainder |
| 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | - | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | - | - | 0.05 | Remainder |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | 0.05 | Remainder |
| 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | - | 0.25 | - | - | 0.1 | 0.05 | Remainder |
| 5754 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.05 | Remainder |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
| 7075 | 0.4 | 0.5 | 1..2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | - | - | 0.2 | 0.05 | Remainder |
