Aluminum anode yoke

Feb 02, 2023

aluminum anode yoke is an indispensable device in the anode guide rod in the process of electrolytic aluminum production, which plays the role of connecting the above and the below.As consumables, the aluminum anode yoke and its aluminum guide rod will be used up after one month of production in the electrolysis workshop, when the old anode assembly needs to be removed and replaced with a new one.However, aluminum slag and electrolyte will remain on the old guide rod.Electrolyte cleaning will also be done in the anode assembly plant.In addition to removing the electrolyte at the periphery of the aluminum anode yoke, the phosphor-iron ring wrapped in a circle of the steel claw also needs to be removed. Here, the phosphor-iron ring pressing machine is required for depressing treatment, and finally the shot blasting is cleaned up for recycling.In addition to the anode steel claw recycling, there are professional production.

The arc furnace and intermediate frequency furnace are used to add rare earth to refine the steel to ensure the gas content in the molten steel and the conductivity and strength of the steel claw.The general production has parallel three claw, four claw, three - dimensional four claw, six claw, eight claw, double anode steel claw and other models. aluminum anode yoke is a consumable in the electrolytic aluminum production process, and its consumption and replacement frequency are generally based on the production limits of the electrolytic workshop.The movement of the anode assembly is performed only when the bus is lifted and the anode is replaced.
Generally, when the anode carbon block is consumed for 15-18 days, the bus bar shall be raised once and the anode assembly shall be adjusted once.However, the consumption of the anode carbon block is about 30 days, so it is necessary to replace the anode at this time. Each anode replacement is the consumption of the anode steel claw, and the replacement cycle of the aluminum anode yoke is 30 cycles, that is, 30 months, with an average of two and a half years.Sometimes need to see the specific consumption to determine, this aluminum anode yoke.

Aluminum anode yoke

Aluminium Sheets

Aluminium Coils

Aluminium Foils

Aluminium Strips

Aluminium Circles

Coated Aluminium

Mirror Aluminum

Stucco Embossed Aluminum

Aluminum