8011 Aluminium coil description
- Alloy:8011
- Temper:HO,H18,H14,H24,H16
- Thickness:0.15mm-6.0mm
- Width:80mm-2300mm
- Standard production:ASTM-B-209M,BS EN 485-2,BS EN 573-3,GB/T3880-2008
- MOQ:5 tons per size
- Mother coil:DC or CC
- ID:76mm,152mm,408mm,508mm
- Surface:Mill finishing,mirror finishing,checkered
- Package:Export standard package with wooden pallet
- Package way:Eye to sky or eye to wall
- Delivery time:within 30days
- Origin:China
- Certificate: Mill Test Certificate,Certificate of origin:Form A,Form E,CO
8011 Aluminium coil Alloy Composition
GB/T3190-2008
alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al.min |
8011 | 0.4-0.8 | 0.5-1.0 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.05 | Rem. |
Inner quality standard:
alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al.min |
8011 CC | 0.6-0.66 | 0.7-0.78 | 0.03 | 0.03 | 0.03 | 0.01 | 0.01 | 0.015-0.025 | Rem. |
8011 DC | 0.6-0.65 | 0.75-0.8 | 0.04-0.09 | 0.08 | 0.05 | - | 0.05 | 0.02-0.03 |
Rem. |
8011 aluminum coil Mechanical properties
Tensile strength(Mpa) | Yield strength(Mpa) | Elongtion(%) |
125-165 | 110 | 2-5 |
8011 Aluminium coil application
1.8011 aluminum coil is widely used for decoration, ceilings, curtain wall, chemical product container, alloy doors and windows, transport equipment parts, fuel tanks, conduit, kitchen countertops and so on.
2.8011 aluminum coil also can make aluminium caps,cooling fin,food packing material, hot sealing ,heat exchanger and condensator for A/C.
Another alloy aluminium coil
Chemical Properties
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min.A1 |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.6 |
1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
1100 | 0.95 | 0.05-0.2 | 0.05 | - | - | - | 0.1 | - | - | - | 0.05 | 99 | |
1200 | 1.00 | 0.05 | 0.05 | - | - | - | 0.1 | - | - | 0.05 | 0.05 | 99 | |
3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.15 | Remainder |
3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | - | 0.25 | - | - | - | 0.15 | Remainder |
3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | - | 0.4 | - | - | 0.1 | 0.15 | Remainder |
3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.1 | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
3A21 | 0.6 | 0.7 | 0.2 | 1.0-1.6 | 0.05 | - | - | 0.1 | - | - | 0.15 | 0.15 | Remainder |
3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | - | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | - | - | 0.05 | Remainder |
5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | 0.05 | Remainder |
5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | - | 0.25 | - | - | 0.1 | 0.05 | Remainder |
5754 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.05 | Remainder |
6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
7075 | 0.4 | 0.5 | 1..2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | - | - | 0.2 | 0.05 | Remainder |