5052 5083 5754 5454 5005 5A02 5A05 Aluminium Circle

Jul 16, 2023

5052 5083 5754 5454 5005 5A02 5A05 Aluminium Circle

aluminium is professional aluminium circles manufacturer in China, the aluminium circles because of its DDQ--deep drawing quality and spinning quality, hard anodizing quality, they are widely used for making cookware, cooking utensils, non-stick cookware etc. The spinning quality deep drawing quality aluminim circles norally include alloy A3003, ally A3004, alloy A1200, alloy A1100, alloy A1070, alloy A1060, alloy A1050, and normally in temper O, H12 and H14,O temper aluminium circles normally is used for making cookware body, H12 and H14 temper aluminium circles normally used for making cookware cover, H14 temper circles sometimes used to make cookware bottom. Our A1050 A1060 A1070 A1200 A1100 A3003 A3004 aluminum circles are hot rolled quality, fine grain, after anodizing the surface no looper line, very bright and excellent pearl color surface.

Aluminium manufactures alloy 5052 5083 5754 5454 5005 5A02 5A05 aluminium circle with with higher strength and excellent in forming and corrosion resistance that can be subject to further treatment by the following methods: deep drawing, spinning,etc.

Alloy: 5052 5083 5754 5454 5005 5A02 5A05

Temper: O, H12, H14,H16,H18,H22,H24,H26,H32,H34

Thickness: 0.4~150mm

Diameter: 80~1200mm

Surface：Mill finish

Chemical Properties

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ga	V	Ti	Other	Min.A1
5052 5083 5754 5454 5005 5A02 5A05	0.25	0.40	0.10	0.10	2.2-2.8	0.15-0.35	-	0.10	-	-	-	0.15	Remainder

Section	Alloy	Characteristics	Application
5000 series	AA5A02 AA5A05 AA5005 AA5052 AA5754 AA5454 AA5083	Have higher strength than 3000series and excellent in forming and corrosion resistance		Spare parts, Rocket bottom,Pressure Vessel,Oil tanker cover,Cover in outdoor,etc.

Diameter List

≧20	≧140	≧170	≧200	≧250	≧300	≧400	≧500	≧600	≧700	≧800
20	140	170	200	250	300	400	500	600	700	800
25	141	172	203	252	305	405	505	610	705	810
93	142	173	205	254	310	410	510	615	710	838
100	143	175	210	255	312	420	515	619	720	890
105	144	176	211	258	315	425	520	630	730	902
109	145	177	212	260	320	430	525	635	740	945
110	147	178	215	267	325	435	530	645	760	960
112	149	180	216	268	330	440	540	650	770	1000
115	150	181	217	270	335	445	545	655	780	1150
118	153	182	218	272	340	450	550	665		1200
120	154	183	220	274	345	455	560	670
121	155	184	221	275	350	460	565	680
122	157	185	222	277	355	465	570	690
123	158	188	225	278	360	470	575
124	160	190	226	280	364	475	580
127	161	192	230	282	368	480	585
128	162	193	233	285	370	485
129	163	195	235	290	375	490
130	164	198	237	292	380	495
132	165		238	293	385
133	166		240	295	390
134	167		242		395
135	168		245
136	169		249
137
138
139

Mechanical Properties

TEMPER	THICKNESS(mm)	TENSILE STRENGTH	ELONGATION%
HO	0.36-6	60-100	≥ 20
H12	0.5-6	70-120	≥ 4
H14	0.5-6	85-120	≥ 2

Properties

Physical Property	Value
Density	265 g/cm3
Melting Point	570 C
Thermal Expansion	25 x10^-6 /K
Modulus of Elasticity	72 GPa
Thermal Conductivity	121 W/m.K
Electrical Resistivity	0.058 x10^-6 .m

Spec: BS EN 485-2:2008
Sheet - 0.2 - 6.3mm Thick

Mechanical Property	Value
Proof Stress	125 Min MPa
Tensile Strength	275 - 350 MPa
Hardness Brinell	75 HB

Spec: BS EN 485-2:2008
Plate - 6.3mm to 80mm

Mechanical Property	Value
Proof Stress	115 Min MPa
Tensile Strength	270 - 345 MPa
Hardness Brinell	75 HB

Spec: BS EN 485-2:2008
Plate - 80mm to 120mm

Mechanical Property	Value
Proof Stress	110 Min MPa
Tensile Strength	260 Min MPa
Hardness Brinell	70 HB
Elongation A	12 Min %

5052 5083 5754 5454 5005 5A02 5A05 Aluminium Alloy circle Features :

1.Alloy 5052 5083 5754 5454 5005 5A02 5A05 aluminium circle with higher strength and excellent in forming and

corrosion resistance

2.Wide range of selection on circles' size including customized shape and size.

3. Excellent reflectivity, good for Polishing;

4.Excellent deep drawing and spinning quality.

5.Good anodized quality, suitable for hard anodizing and enameling;

6.Clean surface and smooth edge, hot rolled quality, fine grains and after deep drawing no looper lines;

7.Excellent pearl color anodizing.

8.RoHS and REACH compliance

9.Well-Protected Packing

5052 5083 5754 5454 5005 5A02 5A05 Aluminium Alloy circle Intended uses :

making Spare parts, Rocket bottom,Pressure Vessel,Oil tanker cover,Cover in outdoor,etc.

5052 5083 5754 5454 5005 5A02 5A05 Aluminium circle production line :

1.Prepare the master alloys

2.Melting furnace :put the alloys into the melting furnance

3.D.C.cast aluminum ingot:To made the mother ingot

4.Mill the aluminum ingot:to make the surface and side smooth

5.Heating furnnace

6.Hot rolling mill:made the mother coil

7.Colding rolling mill:the mother coil was rolled as the thickness you want to buy

8.Punching process:become the size what you want

9.Annealing furnace:change the temper

10.Final inspection

11.Packing:wooden case or wooden pallet

12.Delivery

5052 5083 5754 5454 5005 5A02 5A05 Aluminium circle package :

1.Put the driers side the aluminium circle , keep the products dry and clean.

2.Use the clean plastic paper , packing the aluminium circle , keep good sealing.

3.Use the snakeskin paper , packing the surface of the plastic paper , keep good sealing.

4.Next , There are two ways of packaging :

One way is wooden pallet packaging , using the crusty paper packing the surface ;

Another way is wooden case packaging , using the wooden case packing the surface.

5.Final , lay the steel belt on the wooden box 's surface , keep the wooden box fastness and secure.

5052 5083 5754 5454 5005 5A02 5A05 Aluminum circle advantages :

1.Good quality of deep drawing aluminium circle , and can maintain semi-specular finish with a

65% minium total reflectivity after bright dip and anodize.

2. speciality is in deep drawing quality . Grain size is tightly controlled to minimize

the "orange peel effect " , The "orange peel effect" is a rough surface,like the surface of an orange peel,

which often occurs after deep drawing. tightly controls the chemistry and heat treating to

maximize the elongation that allow the materials to stretch more.

3. is a major aluminium circle producer of bottom plates , has been producing impact bonded bottom plates in high volumnes for more than 10 years.

5052 5083 5754 5454 5005 5A02 5A05 Aluminium Circle

Aluminium Sheets

Aluminium Coils

Aluminium Foils

Aluminium Strips

Aluminium Circles

Coated Aluminium

Mirror Aluminum

Stucco Embossed Aluminum

Aluminum