Aluminum Engine Block

Aluminum engine block

aluminium specilizes in procesing Aluminum engine block, we have the slitter line, slab cutting line, shear line.. The equipments include sheet shear machine, plate sawing and cutting machine, tube and bar sawing machine and so on. We can slit, cut across, longitudinal cutting, sawing, shearing and coated with plastic. We can offer the exactest Aluminum engine block which is the most economical and reasonable.



Aluminum engine block, offered by us, are manufactured using high quality Aluminum,are made available in different dimensions as per the requirement of the clients. Owing to their good physical properties, processability and corrosion resistance ,and with high strength, high hardness ,low sensitivity to crack,etc,the Aluminum engine block can be used for different engine,such as oil engine,diesel engine,etc.

General Specification

7075 Solid Square Rectangle Aluminium Block is the main alloy to be used for processing engine.

Alloy Temper Thickness(mm) Width(mm) Length(mm) Surface Treatment: Shape:
7075 Solid Square Rectangle Aluminium Block O、T6、T651、T7451 6-300 100-2600 500-16000 Mill Finish
Anodized Finish.
Square
Rectangular

Remark:can made available in different dimensions as per the requirement of the clients.

Chemical Composition


Alloy Chemical Component (%)
Si Fe Cu Mn Mg Cr Zn Ti Zr others Al
single total
7075 0.40 0.50 1.2-
2.0
0.30 2.1-
2.9
0.18-
0.28
5.1-6.1 0.20 -- 0.05 0.15 Remainder

Physical property


Alloy Temper Specified Thickness mm Tensile
strength
Rm MPa
Yield strength
Rp 0.2 MPa
Elongation min. Bend Radius Hardness
over Up to Min. Max. Min. Max. A50mm A 180° 90° HBW
7075 O 6.0 12.5 - 275 - 145 10 - - 4.0t 55
12.5 75.0 - 275 - - 9 - - - 55
T6 T651 T62 6.0 12.5 540 - - 460 - 8 - - - 160
12.5 25.0 540 - 470 - - 6 - - 161
25.0 50.0 530 - 460 - - 5 - - 158
50.0 60.0 525 - 440 - - 4 - - 155
60.0 80.0 495 - 420 - - 4 - - 147
80.0 90.0 490 - 390 - - 4 - - 144
90.0 100.0 460 - 360 - - 3 - - 135
100.0 120.0 410 - 300 - - 2 - - 119
120.0 150.0 360 - 260 - - 2 - - 104
T652 150 200 360 - 260 - - 2 - - -
200 300 360 - 260 - - 2 - - -



Performance advantage of 7075 Solid Square Rectangle Aluminium Block


1, After the elimination of stress, processing will not deformation, warping. All super thick 7075 Solid Square Rectangle Aluminium Block by ultrasonic detection, can ensure no blisters, impurities. 7075 Solid Square Rectangle Aluminium Block of high thermal conductivity, can shorten the molding time, improve work efficiency.
2, 7075 Solid Square Rectangle Aluminium Block with good physical properties, processability and corrosion resistance is good, the use of age hardening can get high strength;
3, Even if the natural aging, 7075 Solid Square Rectangle Aluminium Block can also achieve a very high strength, low sensitivity to crack;
4, The welding part of the heat effect, due to the heating was dissolved, so after the natural aging, the strength can be restored, so as to improve the strength of the weld seam.

Application:

Aluminum engine block can be used for different engine,such as oil engine,diesel engine,etc.



Aluminium Sheets
Aluminium Sheets

View Details
Aluminium Coils
Aluminium Coils

View Details
Aluminium Foils
Aluminium Foils

View Details
Aluminium Strips
Aluminium Strips

View Details
Aluminium Circles
Aluminium Circles

View Details
Coated Aluminium
Coated Aluminium

View Details
Mirror Aluminum
Mirror Aluminum

View Details
Stucco Embossed Aluminum
Stucco Embossed Aluminum

View Details