Details for aluminium circle
Our high quality aluminium circle sheet can be used in the production of a variety of cookware products,such as for deep drawing cooking pot, spinning quality for kitchen utensils, for aluminum Non stick cookware, for cookware bottom, for non-stick cookware, for non-stick pan, for non-stick pan, for kitchenware etc.
- Alloy:1050,1060,1070,1100,1200,3003,3105,3004,3004,5005,5052,5754,5083,6061,
- Temper:O(soft),H14,H12,H24,H32,H34,H38,H111
- Mather coil:DCor CC
- Producing standard:ASTM,EN,DIN,CN
- Thickness:0.5-10mm
- Diameter:100mm-1200mm
Product process of the aluminum circle
- Prepare the master alloys
- Melting furnace :put the alloys into the melting furnance
- D.C.cast aluminum ingot:To made the mother ingot
- Mill the aluminum ingot:to make the surface and side smooth
- Heating furnnace
- Hot rolling mill:made the mother coil
- Colding rolling mill:the mother coil was rolled as the thickness you want to buy
- Punching process:become the size what you want
- Annealing furnace:change the temper
- Final inspection
- Packing:wooden case or wooden pallet
- Delivery
Features of aluminium circle
- Alloy aluminium circles, deep drawing quality, good spinning quality, excellent forming and anodizing, no four ears.
- Excellent reflectivity, good for Polishing.
- Good anodized quality, suitable for hard anodizing and enameling
- Clean surface and smooth edge, hot rolled quality, fine grains and after deep drawing no looper lines
- Excellent pearl color anodizing
Chemical properties aluminium circle
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | Other | Min.A1 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.6 |
| 1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
| 1100 | 0.95 | 0.05-0.2 | 0.05 | - | - | - | 0.1 | - | - | - | 0.05 | 99 | |
| 1200 | 1.00 | 0.05 | 0.05 | - | - | - | 0.1 | - | - | 0.05 | 0.05 | 99 | |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.15 | Remainder |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | - | 0.25 | - | - | - | 0.15 | Remainder |
| 3105 | 0.6 | 0.7 | 0.3 | 0.3-0.8 | 0.2-0.8 | 0.2 | - | 0.4 | - | - | 0.1 | 0.15 | Remainder |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.1 | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
| 3A21 | 0.6 | 0.7 | 0.2 | 1.0-1.6 | 0.05 | - | - | 0.1 | - | - | 0.15 | 0.15 | Remainder |
| 3104 | 0.6 | 0.8 | 0.05-0.25 | 0.8-1.4 | 0.8-1.3 | - | - | 0.25 | - | - | 0.1 | 0.15 | Remainder |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | - | - | 0.05 | Remainder |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | 0.05 | Remainder |
| 5754 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.05 | Remainder |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | - | 0.15 | 0.05 | Remainder |
