7055 aviation aluminum alloy block Bar
7055 aviation aluminum alloy block Bar has the characteristics of low density, high strength, good processing performance, good welding performance and good resistance to stress corrosion, and is widely used in aerospace and other fields. 7055 aviation aluminum alloy block Bar is an outstanding representative of the new high-strength aluminum alloy. The 7055 aviation aluminum alloy block Bar is a new type of aluminum developed by adding Zn and Cu content to the 7050 aluminum alloy and reducing the content of Fe and Si impurities. alloy. The research results show that the 7055 aviation aluminum alloy block Bar has higher strength and stronger fracture toughness than 7050 aluminum alloy, and has broad application prospects.
Overview of 7055 Aviation Aluminum Alloy Block Bar:
The development of the modern aviation industry requires aeronautical structural materials with higher strength, better fracture toughness, and resistance to stress corrosion cracking. 7055 aviation aluminum alloy block is the alloy with higher strength in deformed aluminum alloy. It is reported that 7055 aviation aluminum alloy plate ingot casting is difficult, but Aluminum has optimized the production of 7055 aviation aluminum alloy plate through technical research and trial and error. Process, successfully produced 7055 aviation aluminum alloy block Bar.
7055 aviation aluminum alloy block Bar chemical composition
Aluminum (Al) balance
Chromium (Cr) ≤ 0.04
Zirconium (Zr) 0.08~0.15
Zinc (Zn) 5.7 ~ 6.7
Silicon (Si) ≤ 0.12
Iron (Fe) 0.000 ~ 0.150
Manganese (Mn) ≤ 0.10
Magnesium (Mg) 1.9 ~ 2.6
Titanium (Ti) ≤ 0.06
Copper (Cu) 2.0 to 2.6
Application of 7055 aviation aluminum alloy block Bar
7055 aviation aluminum alloy block Bar are mainly applied to modern aerospace, weapons, vehicles and other fields.
Aluminium Sheets
View DetailsAluminium Coils
View DetailsAluminium Foils
View DetailsAluminium Strips
View DetailsAluminium Circles
View DetailsCoated Aluminium
View DetailsMirror Aluminum
View DetailsStucco Embossed Aluminum
View DetailsAluminum
- 1050 Anodised Circle
- the detailed introduction of 6...
- 4343/3003/4045 Aluminum Brazin...
- 1060 1070 Anodized Sheet
- Stone and marble finish Coated...
- Aluminum Foil 5052 H18
- 2324 Aluminum plates Blocks
- Aluminum Forged Blocks
- Custom Aluminum Road Signs Man...
- Al Cu bimetallic sheet
- The Introduction Of Full Anode...
- Best quality red color plain/c...
- Aluminum sign board material
- Influence the quality of clear...
- 5A05 aluminum bar
- Transformer Aluminium Strip
- High Precision Ultra Flat Alum...
- Laminated layered Metal Compos...
- Is the pipe insulation better...
- Anodized aluminum mirror coil