5A05 aluminum plate is Al-Mg series aluminum alloy, the strength is equivalent to 5A03, heat treatment can not be strengthened; the annealed state has high plasticity, and the plasticity is medium when semi-cold work hardening; 5A05 aluminum plate is welded by hydrogen atom welding, spot welding, gas welding, and argon arc welding. Fairly good; machinability is inferior in annealed state, machinability is fair when semi-cold hardened
5A05 Anodized Aluminum Plate sheet
5A05 Anodized Aluminum Plate sheet Features:
It is a widely used aluminum alloy. This alloy has high strength, especially fatigue resistance, high plasticity and corrosion resistance, good corrosion resistance, good weldability, poor machinability, and polishing. Uses are mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, lubricating oil pipes, various liquid containers and other small-load parts made by deep drawing
Chemical composition of 5A05 Anodized Aluminum Plate sheet
Aluminum Al: margin
Silicon Si: ≤0.50 Copper Cu: ≤0.10
Magnesium Mg: 4.8～5.5,Zinc Zn: ≤0.20
Manganese Mn: 0.30～0.6,Iron Fe: 0.000～0.500
Note: Single: ≤0.05; Total: ≤0.10,Mechanical properties:
Tensile strength &;b (MPa): ≥225
Conditional yield strength &;0.2 (MPa): ≥110
Elongation δ10 (%): ≥1
Note: Longitudinal mechanical properties of pipes at room temperature
Sample size: all wall thickness
