1100 aluminum coil is the the ordinary industrial pure aluminum with content of 99.0%. Cannot be heat treated to strengthen; low strength, but with good ductility,formability, weldability and corrosion resistance; Doing the anodised oxidation can further improve its corrosion resistance and anti-static effect,also improve its service life,while obtaining a beautiful surface. It’s general applications in the utensils, heat sinks, caps, printing plates, building materials, heat exchanger components, can also be used for deep stamping products. It is widely used in various fields from cooking utensils to industrial equipment.
The advantages of 1100 Anodised aluminum coil :
• Top-grade quality. Refined, luxurious and sparky surface
• Unique finish
• Low proportion, only 1/3 of stainless steel weight and easy for further fabrication
• Sapphire grade surface hardness for scratching resistance
• Environmental friendly material
• Anti-interference, shield electromagnetic wave
• High thermal conductivity, which perfectly for electronic device
• High finger print resistance and do not attract dust
• The oxidizing layer will not crach, peel off or flake
• Multiple colours can provide unlimited possibilities for device design
• Simplified flow, high yield productivity, cost saving
Chemical Properties - 1100 Anodised aluminum coil
| Alloy Designation | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V | Remarks | Others |
Aluminium min |
||
| Numerical | Chemical Sympols | Each | Total | |||||||||||||
|
EN AW -1100 |
EN AW- Al99.0Cu |
0.95 | 0.05-0.20 | 0.05 | - | - | - | 0.10 | - | - | - | - | 0.05 | 0.15 | 99.00 | |
| Specification-1100 Anodised aluminum coil | |||||||
| Alloy | Temper |
Thickness (mm) |
Thickness Tolerance |
Width (mm) |
Width Tolerance |
Length (mm) |
Length Tolerance |
| 1100 |
O,F H14, H16,H18 H32, H34 H36,H38 etc. . |
≤3mm | Thickness tolerance is according to EN485-4 Standard | ≤1520 |
Width Tolerance is according to EN485-4 Standard |
800-- 2600 |
Length tolerance is according to EN485-4 Standard |
| Anodized aluminum film: | ≤20um, or as customer’s request | ||||||
| Surface: | Anodised surface,Anodized Embossed stucco surface,Anodised mirror surface,etc. | ||||||
| Colors: | Nature,Champagne,Gold,Grey,Bronze,Dark Bronze,Black,etc | ||||||
| Application | It’s general applications in the utensils, heat sinks, caps, printing plates, building materials, heat exchanger components, can also be used for deep stamping products | ||||||
| Mechanical properties are in complicance with EN485-2 standard | |||||||
| Specification-1100 Anodised aluminum coil sheet | |||||||
| Alloy | Temper |
Thickness (mm) |
Thickness Tolerance |
Width (mm) |
Width Tolerance |
Length (mm) |
Length Tolerance |
| 1100 |
O,F H14, H16,H18 H32, H34 H36,H38 etc. . |
≤3mm | Thickness tolerance is according to EN485-4 Standard | ≤1520 |
Width Tolerance is according to EN485-4 Standard |
800-- 2600 |
Length tolerance is according to EN485-4 Standard |
| Anodized aluminum film: | ≤20um, or as customer’s request | ||||||
| Surface: | Anodised surface,Anodized Embossed stucco surface,Anodised mirror surface,etc. | ||||||
| Colors: | Nature,Champagne,Gold,Grey,Bronze,Dark Bronze,Black,etc | ||||||
| Application | It’s general applications in the utensils, heat sinks, caps, printing plates, building materials, heat exchanger components, can also be used for deep stamping products | ||||||
| Mechanical properties are in complicance with EN485-2 standard | |||||||
